background image

21

self-levelling cross-line laser level - 057-4587-6

g) this warranty will not apply to any product or part thereof if any part from another 

manufacturer is installed therein or any repairs or alterations have been made or attempted 
by unauthorized persons;

h) this warranty will not apply to normal deterioration of the exterior finish, including but not 

limited to scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive 
and chemical cleaners; and

i)  this warranty will not apply to component parts sold by and identified as the product of 

another company, which shall be covered under the product manufacturer’s warranty, if any.

additional limitations

this warranty applies only to the original purchaser and may not be transferred. neither the 
retailer nor the manufacturer shall be liable for any other expense, loss or damage, including 
but not limited to any indirect, incidental, consequential or exemplary damages arising in 
connection with the sale, use or inability to use this product.

notice to Consumer

this warranty gives you specific legal rights, and you may have other rights, which may vary 
from province to province. the provisions contained in this warranty are not intended to limit, 
modify, take away from, disclaim or exclude any statutory warranties set forth in any applicable 
provincial or federal legislation.

iMPorTeD BY MaSTerCrafT CanaDa ToronTo, CanaDa M4S 2B8

W

arran

TY

 

Summary of Contents for 057-4587-6













Reviews: