headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
13
OPERATING INSTRUCTIONS
TO ATTACH THE BATTERY PACK
(fig 1)
1. Make sure that the angle grinder is turned off.
2. Align the raised rib on the battery pack with the
grooves on the bottom of the tool, and then attach
the battery pack to the angle grinder.
TO DETACH THE BATTERY PACK
(fig 1)
1. Make sure that the angle grinder is turned off.
2. Depress the battery-release button located
on the front of the battery pack to release the
battery pack.
3. Pull the battery pack forward to remove it from the tool.
INSTALL/REMOVE THE WRENCH
(fig 2)
The auxiliary handle contains a slot for convenient
storage of the wrench.
1. To install the wrench into the auxiliary handle,
just insert the wrench into the slot as far as
possible.
2. To remove the wrench from the auxiliary handle,
just pull it out.
OPERA
TING INSTRUCTIONS
NOTICE:
When attaching the battery pack to the tool, make sure that the raised platform on the pack aligns with the grooves
on the bottom of the tool and that the latches snap properly into place. Improper assembly of the battery pack can cause damage to
internal components.
WARNING!
• To avoid the possibility of accidental starting, always take care not to activate the switch when you are
attaching the battery pack or performing other adjustments to the tool.
FPO
fig 1
Battery-
release
button
Detach
Attach
fig 2
Auxiliary handle
Wrench
Summary of Contents for 054-7947-8
Page 24: ......
