headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
11
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
OPERA
TING INSTRUCTIONS
INSTALL THE MICROFILTER DUST
CANISTER
(fig 2)
Your sander is supplied with a dust canister to help
you keep the working area clean. The dust canister
is ideal for smaller jobs. For maximum efficiency, the
dust canister should be emptied frequently during
operation.
1. Disconnect the sander from the power source.
2. Align the slot on the dust canister with the rib on
the tool, and then push the dust canister onto the
tool until it locks into place.
REMOVE THE MICROFILTER DUST CANISTER
(fig 2)
1. Disconnect the sander from the power source.
2. Simply pull the dust canister away from the tool.
ATTACH THE VACUUM HOSE
(fig 3)
Directly attach the 1 1/4”(3.2 cm) vacuum hose to
the dust port, and then connect the opposite end of
the vacuum hose to a vacuum cleaner.
fig 3
WARNING!
• Collected sanding dust from sanding surface coatings (polyurethane, linseed oil, etc.) can self-ignite in dust
canister or elsewhere and cause fire. To reduce risk, empty dust canister frequently and strictly follow the
sander manual and coating manufacturer’s instructions.
FPO
Dust port
1 1/4”(3.2 cm)
vacuum hose
fig 2
Rib
Microfilter dust
canister
Summary of Contents for 054-7295-8
Page 20: ......
