Know your cordless hammer drill
9
10
20V max* LIThIUM-ION CORdLeSS hAMMeR dRILL - 054-3122-4
20V max* LIThIUM-ION CORdLeSS hAMMeR dRILL - 054-3122-4
No. Description
No. Description
1
Keyless chuck
6
direction-of-rotation selector
2 Torque-adjustment
ring
7 Led
Worklight
3
Mode-selection ring
8
Bit storage
4
Variable speed trigger switch
9
Forward/Reverse Led Indicator
5
Two-speed gearbox switch
WARNING!
do not allow familiarity with the Cordless hammer drill to cause a lack of alertness. A fraction
of a second of carelessness is enough to cause severe injury.
des
Cri
Ption
oP
era
tin
G
instr
uC
tions
to attach battery pack
(fig 1)
CAUTION!
Avoid the possibility of accidental
starting. Always take care not to
activate the trigger switch when you
are attaching the battery pack or
performing other adjustments to the
tool.
note:
When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with
the groove on the cordless hammer drill and the latches snap into place properly. Improper assembly of the
battery pack can cause damage to internal components.
1. Lock the trigger switch on the hammer drill by placing the direction-of-rotation selector (forward/
centre-lock/reverse) in the centre position.
2. Align the raised portion on the battery pack with the groove on the bottom of the hammer drill, and
then attach the battery pack to the hammer drill as shown.
3. Make sure that the latch on the battery pack snaps into place and that the battery pack is secured to the
hammer drill before beginning operation.
to detach battery pack
(fig 1)
CAUTION!
Avoid the possibility of accidental starting. Always take care not to activate the trigger switch
when you are detaching the battery pack or performing other adjustments to the tool.
1. Lock the trigger switch on the hammer drill by placing the direction-of-rotation selector (forward/
centre-lock/reverse) in the centre position.
2. depress the battery-release button located on the front of the battery pack to release the battery pack.
3. Pull forward on the battery pack to remove it from the hammer drill.
fig 1
1
3
5
6
4
2
7
8
9