9
10
20V max* LIThIUM-ION CORdLeSS dRILL/dRIVeR - 054-3118-6
20V max* LIThIUM-ION CORdLeSS dRILL/dRIVeR - 054-3118-6
No. Description
No. Description
1
Two-speed gearbox switch
5
Led Worklight
2
Forward/reverse Led indicator
6
Trigger switch
3
direction-of-rotation selector
7
Torque-adjustment ring
4
Bit clip
8
Keyless chuck
WARNING!
do not allow familiarity with the Cordless drill/driver to cause a lack of alertness. A fraction of
a second of carelessness is enough to cause severe injury.
des
Cri
Ption
know your cordless drill/driver
oP
er
Atin
G
instr
uC
tions
WARNING!
Carefully read the Instruction Manuals for your Mastercraft 20V max* Lithium-Ion Battery
(054-3124-0/054-3125-8) and Mastercraft 20V max* Lithium-Ion Charger (054-3126-6,
5320.3) for safety and operation instructions.
to attach battery pack
(fig 1)
CAUTION!
Avoid the possibility of accidental
starting. Always take care not to
activate the trigger switch when you
are attaching the battery pack or
performing other adjustments to the
tool.
note:
When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with
the groove on the cordless drill/driver and the latches snap into place properly. Improper assembly of the
battery pack can cause damage to internal components.
1. Lock the trigger switch on the drill/driver by placing the direction-of-rotation (forward/centre-lock/
reverse) selector in the centre position.
2. Align the raised portion on the battery pack with the groove on the bottom of the drill/driver, and then
attach the battery pack to the drill/driver as shown.
3. Make sure that the latch on the battery pack snaps into place and that the battery pack is secured to the
drill/driver before beginning operation.
to detach battery pack
(fig 1)
CAUTION!
Avoid the possibility of accidental starting. Always take care not to activate the trigger switch
when you are detaching the battery pack or performing other adjustments to the tool.
1. Lock the trigger switch on the drill/driver by placing the direction-of-rotation selector (forward/
centre-lock/reverse) in the centre position.
2. depress the battery-release button located on the front of the battery pack to release the battery pack.
3. Pull forward on the battery pack to remove it from the drill/driver.
fig 1
Battery-release button
1
2
3
5
4
6
7
8