Variable-speed trigger switch (Fig. 1)
1. Connect the power cord of your hammer drill to a standard household power outlet.
2. To turn the hammer drill ON, press the trigger switch.
3. To turn the hammer drill OFF, release the trigger switch.
The variable-speed trigger switch delivers higher speed with increased trigger pressure and lower speed
with decreased trigger pressure.
Fig. 1
Lock-on button (Fig. 2)
This hammer drill is equipped with a lock-on button, which is convenient for continuous drilling for extended
periods of time.
1.
To drill continuously, press and hold the trigger switch and then press the lock-on button. Release the
trigger switch.
2.
To unlock the lock-on button and stop continuous drilling, press the trigger switch and the lock-on
button will release automatically.
Fig. 2
Variable
-
speed
trigger switch
Lock
-
on
button
Direction-of-rotation selector (Fig. 3)
The direction of bit rotation is reversible and is cont
rolled by a selector located above the trigger switch.
With the drill held toward you:
1.
Position the direction-of-rotation selector to the right of the tool for forward rotation.
2.
Position the direction-of-rotation selector to the left of the tool for reverse rotation.
Fig. 3
Direction-of
-r
otation
selector
Forward
Reverse
OPERATING INSTRUCTIONS
WARNING
:
TO PREVENT GEAR DAMAGE, ALWAYS ALLOW THE HAMMER DRILL TO COME TO A COMPLETE STOP
BEFORE CHANGING THE DIRECTION OF ROTATION.
WARNING
:
NEVER CONNECT THE HAMMER DRILL TO THE POWER SOURCE WHEN YOU ARE ASSEMBLING PARTS, MAKING
ADJUSTMENTS, INSTALLING OR REMOVING BITS,
CLEANING, OR WHEN IT IS NOT IN USE. DISCONN
ECTING THE
HAMMER DRILL WILL PREVENT ACCIDENTAL STARTING, WHICH COULD CAUSE SERIOUS PERSONAL INJURY
.
O
P
E
R
A
T
IO
N I
N
S
T
R
U
C
T
IO
N
S
O
P
E
R
A
T
IO
N I
N
S
T
R
U
C
T
IO
N
S
model
no
.
054
-
2015 l contact us 1.800.689.9928