13
12
model no. 054-1264-8 | contact us 1.800.689.9928
OPeRATING INSTRUCTIONS
TURNING ON AND TURNING Off (fig 2)
1. Connect the power cord of your impact
wrench to a standard household power
outlet.
2. Press the part of the switch marked F
to run the tool in the forward direction
(clockwise rotation).
3. Press the part of the switch marked
R to reverse the motor direction
(counter-clockwise rotation).
4. Release the switch to stop the tool.
INSTALLING fASTeNeRS
To fasten:
1. Start threading the fastener by hand onto or into its threaded counterpart
(e.g. nut onto bolt, or bolt into nut or threaded hole).
2. With the proper impact socket securely mounted to the wrench, slide the
impact socket onto the nut or bolt head.
3. Place the direction-of-rotation selector in the FORWARD position, firmly hold
the tool and depress the switch. The impact socket will turn the fastener and
impacting will begin once the fastener encounters resistance.
To loosen:
1. With the proper impact socket securely mounted to the wrench, slide the
impact socket onto the bolt head.
2. Place the direction- of-rotation selector in the REVERSE position, firmly hold
the tool and depress the switch. The tool will start to impact immediately.
3. Once the fastener has “broken loose,” it will start to unthread. Be careful that
you do not allow a fastener to spin freely once it is no longer engaged with its
threaded counterpart, as it may be thrown out of the socket.
O
P
e
R
A
TING
INS
TRUCTIONS
O
P
e
R
A
TING
INS
TRUCTIONS
CAUTION!
• Always verify that the tool is switched off and unplugged before
installing any accessories on the tool.
FPO
CAUTION!
• Do not allow familiarity with your impact wrench to make you
careless. Remember that a careless fraction of a second is sufficient
to cause severe injury.
FPO
fig 2
Switch