12V max* LITHIUM-ION BATTERY CHARGER - 054-1260-6
7
• Do not operate the charger with a damaged cord or plug, which could cause shorting and
electric shock.
If damaged, have the charger repaired or replaced by a qualified service technician.
• Do not operate the charger if it has received a sharp blow, been dropped, or has
otherwise been damaged in any way.
Take it to a qualified service technician for an electrical
check to determine if the charger is in good working order.
• Do not disassemble the charger.
Take it to a qualified service technician when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
• Unplug the charger from the electrical outlet before attempting any maintenance or
cleaning to reduce the risk of electric shock.
• Disconnect the charger from the power supply when it is not in use.
This will reduce the risk
of electric shock or damage to the charger if metal items should fall into the opening. It will also help
prevent damage to the charger during a power surge.
• Risk of electric shock.
Do not touch the uninsulated portion of the output connector or uninsulated
battery terminal.
• Save these instructions.
Refer to them frequently and use them to instruct others who may use
this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse
of the product and possible injury.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
..............
WARNING – To reduce the risk of injury, user must read instruction manual
.
SAFETY GUIDELINES