MasterCraft 054-1213-0 Instruction Manual Download Page 11

CORDED DRILL - 054-1213-0

CORDED DRILL - 054-1213-0

19

20

This Mastercraft product is guaranteed 

three (3) years from the date of original retail purchase

 

against defects in materials and workmanship, except for the following components:

a) Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years 
from the date of original retail purchase against defects in workmanship and materials;

b) Component B: Accessories, which are guaranteed for a period of 1-year from the date of original 
retail purchase against defects in workmanship and materials.

Subject to the conditions and limitations described below, this product, if returned to us with proof 
of purchase within the stated warranty period and if covered under this warranty, will be repaired or 
replaced (with the same model, or one of equal value or specification), at our option. We will bear the 
cost of any repair or replacement and any costs of labour relating thereto. 

These warranties are subject to the following conditions and 
limitations:

a)  a bill of sale verifying the purchase and purchase date must be provided;

b)  this warranty will not apply to any product or part thereof which is worn or broken or which has 

become inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, 
operation or maintenance (as outlined in the applicable owner’s manual or operating instructions) 
or which is being used for industrial, professional, commercial or rental purposes; 

c)  this warranty will not apply to normal wear and tear or to expendable parts or accessories that 

may be supplied with the product which are expected to become inoperative or unusable after a 
reasonable period of use; 

d)  this warranty will not apply to routine maintenance and consumable items such as, but not limited 

to, fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments; 

e)  this warranty will not apply where damage is caused by repairs made or attempted by others (i.e. 

persons not authorized by the manufacturer);

f)  this warranty will not apply to any product that was sold to the original purchaser as a 

reconditioned or refurbished product (unless otherwise specified in writing); 

g)  this warranty will not apply to any product or part thereof if any part from another manufacturer 

is installed therein or any repairs or alterations have been made or attempted by unauthorized 
persons;

h)  this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited 

to, scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical 
cleaners; and

i)  this warranty will not apply to component parts sold by and identified as the product of another 

company, which shall be covered under the product manufacturer’s warranty, if any.

Additional limitations

This warranty applies only to the original purchaser and may not be transferred. Neither the retailer 
nor the manufacturer shall be liable for any other expense, loss or damage, including, without 
limitation, any indirect, incidental, consequential or exemplary damages arising in connection with the 
sale, use or inability to use this product.

Notice to consumer

This warranty gives you specific legal rights, and you may have other rights, which may vary from province to 
province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim 
or exclude any statutory warranties set forth in any applicable provincial or federal legislation.

IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8

W

ARRANTY

W

ARRANTY

Summary of Contents for 054-1213-0












Reviews: