4
SAFETY INSTRUCTIONS
model no. 054-0277-4 | contact us 1-800-689-9928
IMPORTANT
Read and follow all safety and operating instructions of the power tool before use.
READ AND UNDERSTAND ALL INSTRUCTIONS
When using electrical tools, safety precautions should always be followed including
the following:
Work area safety
• Do not use outdoors. Do not expose to rain or wet conditions.
• Operate in a childproofed workshop.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Do not place on or near electric burner, or in a heated oven.
• Keep the work area clean and well-lit. Make sure there is adequate surrounding
workspace and is free of obstructions and other debris.
• Do not leave tool running unattended; turn power off. Do not leave tool until it comes
to a complete stop. Extreme caution must be used when moving a tool.
• Keep idle tools out of reach of children and other untrained persons.
• This product is not intended to be used by persons (including children) who are
limited in their physical, sensory or mental capacities, or who lack experience and/or
knowledge of the product unless they are supervised, or have been instructed on how
to use the product, by a person responsible for their safety.
Electrical safety
• Do not use devices with an on/off switch that does not function correctly.
• Do not use this product in a damp or wet location.
• Keep cord away from heat, oil, and sharp edges.
• To protect against electrical shock, do not immerse cord, plugs, or the main unit in
water or other liquid. Only the non-electrical parts of the unit may be immersed for
cleaning. Thoroughly clean and dry these parts prior to first use and before every
subsequent use.
• Do not clean with metal scouring pads. Metal pieces can break off the pads and touch
electrical parts involving risk of shock.
• Unplug from outlet when not in use and before maintenance, cleaning, and making any
adjustments or changing accessories.
• Periodically remove the attachments and clean metal dust from enclosure and attachments.
• Inspect tool before operating. Do not operate any tool with a damaged cord or plug or after
the tool malfunctions or has been damaged in any manner.
• Do not overload the device. Do not use the device for purposes for which it is not intended.
• Return tool to the nearest authorized service facility for examination, repair, or adjustment.
• This electric sharpener has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not change the plug in any way.
• Before plugging in the tool, be certain the outlet voltage supplied is compatible with the
voltage marked on the nameplate within 10%. An outlet voltage incompatible with that
specified on the nameplate can result in serious hazards and damage to the tool.
• To disconnect, turn on/off switch to "off", then remove plug from wall outlet.
Summary of Contents for 054-0277-4
Page 2: ......
