Press "REL" button. The meter enters Relative mode and stores
the present reading as a reference for subsequent measure-
ments. "REL" appears on the display as an indicator. The display
reads zero.
The display shows the difference between the reference and a
new measurement.
Press "REL" button again. The meter exits Relative mode.
The meter defaults to autorange mode in measurement functions
which have both autorange mode and manual range mode. When the
meter is in autorange mode, "AUTO" is displayed.
Manual Ranging and Autoranging
1.
2.
3.
To enter manual range mode, press the "RANGE" button. The
meter enters manual range mode and "AUTO" turns off. Each
press of the "RANGE" button increases the range. When the
highest range is reached, the meter wraps to the lowest range.
1.
After pressing the "HOLD" button, the present reading is held on the
display, meanwhile " " is displayed on the display as an indicator.
To exit the Data Hold mode, press the button again. The indicator
" " disappears.
Data Hold Mode
20
OPERATING INSTRUCTIONS
