headline bars
continuation tabs
notes
warnings
54
headline bars
continuation tabs
notes
warnings
model no. 046-0266-0 | contact us 1-800-689-9928
TR
oU
bles
Hoo
TI
nG
Opener light stays on.
•
It is normal for the opener’s light to stay on for about 3 minutes
after each activation.
•
If the opener’s light was turned on by the light button on the
wall console, it will stay on until the light button is pressed
again to turn the light off.
Opener activates by
itself.
•
Check all remotes programmed into the opener. Check for
items pressing on any remote’s button.
•
If a remote has been stolen, erase the opener’s memory (refer
to page 42) to prevent the lost remote from activating the
opener. Reprogram the remaining remotes into the opener
(refer to page 41).
•
Check the wiring between the wall console and the opener.
Look for any wire holder that has cut into the wire’s insulation,
or wire that has been pinched by another object. Replace any
bad wiring.
•
Examine the wiring at the opener’s terminals and at the wall
console's terminals. Look for any wire strands that are close to
or touching adjacent terminals.
Door reverses for no
apparent reason.
•
The door hardware may be binding causing the close door
force setting to be exceeded. Disengage the trolley and
manually check the door movement and balance. Lubricate
the door hardware as recommended by the garage door
manufacturer.
•
Re-adjust the travel limits and force adjustments to ensure the
automatic force adjustment are set properly.
•
Ensure the safety beam sensor is securely fastened and no
sunlight is shining directly onto the receiving sensor.
Opener is noisy.
•
Adjust the belt tension (refer to page 15).
•
Lubricate the door hardware as recommended by the garage
door manufacturer.
Opener won’t work
due to power failure.
•
Use the emergency release handle to disconnect the opener
from the door. The door can be opened or closed manually until
power is restored.
