9
OPERATING INSTRUCTIONS
HOW TO USE
1
Power light/Selector
2
Thermostat knob
NOTE:
•
It is normal for the heater to cycle ON and OFF as it maintains the preset temperature.
To prevent the unit from cycling, raise the temperature setting.
Operating Instructions:
1. Place heater on firm, level surface.
2. Avoid overloading your circuit by not using other
high wattage appliances in the same oulet. At 1500
W, this unit draws 12.5 A.
MODE SETTINGS:
1. To start heater operation, turn thermostat control
clockwise to the highest setting.
2. Switch the selector to your desired heat settings:
1- Low Heat: The heater will run continously at 1300 W.
2- High Heat: The heater will run continously at 1500 W.
3. The power light will remain lit during operation.
THERMOSTAT CONTROL:
1. Turn the thermostat control clockwise to the highest
position to start heater. Allow heater to operate and
warm up the room.
2. When the desired temperature/comfort level is
reached, lower the temperature setting by turning the
thermostat control counter-clockwise until the heater
stops operating.
3. The thermostat will now automatically maintain the
pre-set temperature level by turning the heater ON
and OFF.
