EN_rev01
USER'S AND ASSEMBLING MANUAL FOR 25 mm MOTOR MOON series
1. WARNING
Dear Customer, we thank you for buying MASTER® product. In this instruction are included important informations concerning the mode of use
and safety of installation. Respect the following instructions and keep them for eventual future consultations.
This type of motor 25 mm series with mechanical limit switch are able to more small closing as small and light screens, roller blinds or small
mosquito nets. Any other use is improper and prohibited. The product is not designed for continued use.
The product technical specifications are reported into the label (A) applied on it.
2. NOTES ABOUT SAFETY
1.
The product has to be installed by qualified technical staff.
2.
Check that the package has not been damaged during the transport.
3.
The power motor should be adequate to applied load.
4.
Verify that the rolling wrapper is correctly positioned, in order to cancel useless frictions or sticking movement.
5.
Check that form and dimensions of adapters (A) are suitable to the inside diameter of rolling wrapper. Adapters, supports and other
accessories concerning motors and its movement, have to be choose only in MASTER® catalogue.
6.
Is forbidden tamper the power supply cable.
7
. The power supply cable has to be fixed on with care, in order to avoid impact with parts in moviments.
8.
Be sure that the motor is fixed using eventual pins supplied.
9.
Before installing the motor be sure to complete it with its accessories.
10.
Avoid giving repetitively reversals.
11.
In case of wrong function do not press commands and advise the technical installer.
3. LIMIT SWITCH SETTINGS
1.
The limit switch system is an electromechanical type. When it reaches the closing or opening bound, through microswitches: the motor power
supply interrupts .
2.
To adjust the limit switch, working on the 2 adjustment crews (C) on motor head through the regulator supplied.
All products and technical specifications given in this document are subject to variation without notice. The manufacturer shall not be liable for damage resulting from improper, incorrect or unreasonable use.
Hereby MASTER SpA declares that this motor complies with the essential requirements and other relevant provisions of Directives. The declaration of conformity can be requested at the following email
address: [email protected]
___________________________________________________________________________________________________________________
3
6
24
31
A
+
-
C
Ø
2
6
10
11
Ø
25
8
312
19
7
B