08
08.
FINE ADJUSTMENT OF UPPER LIMIT SWITCH
(*) briefly press, max 2 seconds between each press and the next.
01. Bring the motor to the upper limit switch (or near).
02. Press in sequence the
buttons(*).
STOP - PROG - UP
The motor makes 1 downward movement.
03. Using
and
adjust the upper limit switch.
UP
DOWN
04. Press
. The motor makes 1 down/up movement.
PROG
WARNING:
The modification of the upper limit switch is not possible if the upper limit switch has been learned by contact with an obstacle.
09. FINE ADJUSTMENT OF LOWER LIMIT SWITCH
(*) briefly press, max 2 seconds between each press and the next.
01. Bring the motor to the lower limit switch (or near).
02. Press in sequence the
buttons(*).
STOP - PROG - DOWN
The motor makes 1 downward movement.
03. Using
and
adjust the upper limit switch.
UP
DOWN
04. Press
. The motor makes 1 up/down movement.
PROG
STOP
PROG DOWN
PROG
10. MODIFY BOTH THE LIMIT SWITCHES
(*) briefly press, max 2 seconds between each press and the next.
01. Bring the motor in an intermediate position.
02. Disconnect power supply, wait a few seconds; connect power supply.
03. Press in sequence the
buttons(*).
STOP - PROG - STOP
The motor makes 1 up/down movement; motor moves downward.
04. Depending on how the roller shutter is installed, follow the instructions at point 7
and following of the paragraphs 06.1 or 06.2 or 06.3 or 06.4
STOP
PROG
STOP
WARNING:
If the procedure is not completed, the motor automatically sets a short stroke. In case of interruption of the procedure it is necessary to repeat it completely.
Go to point 7
and following of
the paragraphs
06.1 or 06.2 or
06.3 or 06.4
ON
STOP
PROG
UP
PROG
WARNING:
The lower limit switch can be retouched only if the motor is in NO HOOK mode.
11. FAVORITE POSITION
11.1 USING A TRANSMITTER
Consult the manual of your transmitter in
the section about the functions
associated with the buttons.
Other transmitters...
To memorize:
01. Bring the motor in the favorite position.
02. Press DOWN 6 times (briefly and quickly).
To recall:
01. Press DOWN 2 times (briefly and quickly).
11.2 USING THE COMMAND BUTTONS
6 x DOWN
2 x DOWN
TO MEMORIZE
TO RECALL
3 x UP
8 x UP
STOP
P1
P2
P2
P1
07. HOW TO MEMORIZE/DELETE A RADIO DEVICE
01. Bring the motor in an intermediate position.
02. Press PROG of an already memorized transmitter for 5 s. The motor performs 2
upward movements.
03. Within 15 seconds, to memorize/delete:
a transmitter: press
of transmitter you want to memorize/delete
STOP
a sensor: press «
» of sensor you want to memorize/delete
P1
a rain sensor: press «
» of rain sensor you want to memorize/delete
P2
04. 1 upward movement: device memorized!!
1 downward movement: device deleted!!
2 downward movement: error!!
PROG
(5 seconds)
NOTES:
point 03. in battery powered sensors may be necessary to keep the button pressed up to 10 seconds.
point 04. "error"is reported if the radio code is not received in time, if the receiver's memory is full, if you try to delete the only memorized transmitter, if you try to memorize
more than 1 sun sensor or more than 4 wind sensor
01. Bring the motor in an intermediate position.
02. Within 15 seconds, press
(briefly and quickly).
UP 8 times
The motor performs 3 upward movements.
03. Within 15 seconds, press
(briefly and quickly).
UP 3 times
The motor performs 2 upward movements.
04. Within 15 seconds, to memorize/delete:
a transmitter: press
of transmitter you want to memorize/delete
STOP
a sensor: press «
» of sensor you want to memorize/delete
P1
a rain sensor: press «
» of rain sensor you want to memorize/delete
P2
05. 1 upward movement: device memorized!!
1 downward movement: device deleted!!
2 downward movement: error!!
NOTES:
point 04. in battery powered sensors may be necessary to keep the button pressed up to 10 seconds.
point 05. "error"is reported if the radio code is not received in time, if the receiver's memory is full, if you try to delete the only memorized transmitter, if you try to memorize
more than 1 sun sensor or more than 4 wind sensor
07.1 USING A TRANSMITTER
07.2 USING COMMAND BUTTONS
STOP
P1
P2
P2
P1
To memorize:
01. Bring motor in the favorite position
02. Press together STOP and FOR ME
until the motor performs a signal.
To recall:
01. Press FOR ME
ARCO
To memorize:
01. Bring motor in the favorite position
02. Press briefly STOP 6 times and then
hold DOWN until the motor performs
a signal.
To recall:
01. Press STOP 3 times (briefly)
FLUTE, KUADRO, KORT
To memorize:
01. Bring motor in the favorite position
02. Press together STOP and until
the motor performs a signal
To recall:
01. Press FOR ME
VISIO