EN
19
Ø
Frequently Asked Questions
PS: MAKING SURE SHUT OFF ELECTRICITY BEFORE YOU DOING IT.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
3.
The control panel does not work
Reset the over-current protector
1. Open the cover on the Top Panel.
2. Press the button of the over-current protector on the side of Main Power Box.
3. Close the cover on the Top Panel.
4.
Reading light does not work
Change the bulb
Push down the bulb together with the cover from the top panel, and then pull down the plug. Take off the metal pin around
the bulb while also take down the broken bulb, next, put a new bulb into the original place, put on pin and install onto the
top.
Summary of Contents for MAS-I240
Page 1: ...CZ Infra sauna MASTER i240 ceramic MAS I240 Návod k použití ...
Page 24: ...SK Infra sauna MASTER i240 ceramic MAS I240 Návod k použitiu ...
Page 47: ...CZ Infra sauna MASTER i240 ceramic MAS I240 Návod k použití ...
Page 67: ...EN 20 3 The heater does not heat up Change the ceramic heater ...
