NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE
CONNECTED TO A POWER SOURCE
© 2021, Pinnacle Climate Technologies, Inc.
High Velocity Fan User’s Manual
2
- Before operating always check fan for loose or
damaged parts. Inspect power cord for any dam-
age. Never use fan if any parts are
damaged or missing. Never use fan without safety
guards attached.
- Operate only on 120 volt 60 Hz (cycle) current with
a minimum of a 15 amp circuit.
- When used with an extension cord, use only a cord
of proper size (Amp rating), UL listed, and with
receptacle to accept three prong grounded plug
furnished on the fan’s power cord. Always keep
power cord and extension cords away from heat,
oil, and sharp edges. Inspect cords periodically and
replace if damaged.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and regulations.
When servicing or replacing a component requires the removal or
disconnection of a safety device, the safety device is to be reinstalled or
remounted as previously installed before operating this fan.
Use this fan only in the manner intended by the manufacturer. If you have any
questions, contact Customer Service at 800-641-6996.
WARNING
WARNING
WARNING
12" Floor Fan
20
"
Floor Fan
20F
30BCT
20
"
Omni Floor Fan
20FOMNI
24
"
Barrel Fan
24DCT
30
"
Floor Fan
12F
To Reduce The Risk Of Electric Shock, Do Not Expose To Water Or Rain.This unit
is designed for indoor use only.
WARNING