Master Tailgaters MR-43E2DVR1 User Manual Download Page 4

3

4

BASIC OPERATING INSTRUCTIONS

    1.  SD  cards  can  be  made  by  several  different  ways  using  different  memory  types  and  formatting  types.  In  general,  two  types  are 

commonly found, MLC and TLC. TLC type cards are generally used in phones or other equipment that does mostly reading only, such  as 

playing back ground music. MLC type cards are designed for devices that read and write often such as DVR’s or video cameras. TL C type 

memory will often fail more often under heavy recording of this type.

   2. We only recommend brand name, high quality SD (or TF) cards using MLC technology for this HD DVR mirror. Also only use ca rds 

with a 2K or higher (4k) recording speed. Using lower quality memory or incorrect speed memory will affect the recording qualit y and may 

cause system errors.

    3. Most SD Cards have a working life of about 2 years. Heat, amount of recording time, and overall usage, as well as the qu ality of the 

card may vary as will the life of the card. Memory cards do need to be re-formatted from time to time and should be replaced at  least once 

per year to insure your DVR performing as expected. Remember your DVR is always recording when it is on, this is not the same a s a 

normal camera that only records when a picture is taken. We suggest using a 32GB MLC type SD memory card with a minimum speed o f 

90mb/s for the best recording quality and reliability.

    4. This DVR uses new technology and relies heavily on the SD Card memory. If the mirror or SD card fail to operate correctl y and fail 

to record an incident, the manufacturer or re-seller cannot be held responsible. We recommend you check your SD card regularly to insure 

the system is operating correctly. This device is designed for entertainment purposes only and you should check all local laws  that may 

relate to using such a device in your vehicle. Always use carefully when driving as safety is always the drivers first responsi bility. 

Good

class 4

class 10

class U1

class U3

OK

Note: For the best performance and durability of video recording, we recommend to use C10 U1 level TF card or better.

5

6

7

8

9

2

1

4

3

15

16

17

18

2015/05/27

14:28:40

2015/05/27

14:28:40

03:36:47

1080FHD

Summary of Contents for MR-43E2DVR1











Reviews: