19
ON/OFF SWITCH
To turn the switch ON, press the back of
the switch slider (1) into the body of the
tool. While pressing on the rear of the
slider, push it forward (2) until the front part
of the switch (3) engages the catch
(Fig. 8).
When the switch “snaps” into
position, the switch will remain ON and the
motor will continue running. To turn the
switch OFF, press the rear of the slider
into the angle grinder body. The switch will
“snap” to the OFF position.
GRINDING
Always
select and use grinding discs that
are recommended for the material to be
ground. Make sure that the maximum
operating speed of the grinding disc
selected is
not less than
11,000 RPM.
Secure all work before beginning the
grinding operation.
Secure small workpieces in a vice or clamp
to a workbench.
WARNING:
Never use your
grinder with the guard removed. It has
been designed for use only with the
guard installed. Attempting to use the
grinder with the guard removed will
result in loose particles being thrown
against the operator resulting in serious
personal injury.
WARNING:
Never use your
grinder without eye protection.
Following this rule will reduce the risk
of serious personal injury.
!
ASSEMBLY AND OPERATION
!
Fig. 8
Summary of Contents for 134471
Page 22: ...22 EXPLODED VIEW ...