8
EN
Mini trolling motor is especially developer for small inflatable boats.
Main features: exquisite appearance, light weight, simple installation and no pollution.
BASIC PARAMETERS:
Installation
Main mounting method: stern transom mounting (as shown in Fig.)
1. Hang the motor on the special transom board, screw the two bolts to mount the motor.
2. Screw the know of the tension collar when it reaches the depth you need.
Running
1. Pull the handle fixing collar, pull out handle.
2. Toggle the switch, H: Forward, L: reverse, I: Slow, II: Quick
BATTERY
Any 12V battery could be used as the main power. The larger the battery capacity is, the longer it
will constantly supply electricity. However, due to limited carrying capacity of boats, we suggest
you use 40 Ah battery.
WARNINGS
1. When the propeller gets wound by seaweed or fishing line, or when it gets stuck by
something, please switch off the motor immediately. Otherwise it will get overheated and
burn out.
2. Always make sure the propeller is unobstructed. The best performance is achieved when
the propeller is fully submerged, but less than 10 cm below the water line.
Thrust(LBS)
Voltage
(V)
Current (A)
Power (W)
Speed
18
12
15
180
For2/Re2
