16
NATURAL GAS CONVERSION
18. Pull off the control knob of the 4 main
burners and the searing burner. Use the
Phillips head screwdriver (DD) to attach
the conversion screw (EE) to the back of
the knob. Re-install all the knobs.
The conversion screw must be
attached properly. Failure to tighten
the screw will result in improper
operation.
Hardware Used
x 1
x 5
19. Use the 17 x 19 mm wrench (GG) to
remove the LP hose and regulator from
the manifold. Attach the Natural Gas
Hose (sold separately) and tighten it with
the wrench.
Hardware Used
x 1
x 1
LP hose & Regulator
Phillips Head
Screwdriver
DD
Conversion Screw
EE
18
19
17 x 19 mm Wrench
GG
EE
10 ft. Natural Gas Hose
(Sold separately)
10 ft. Natural Gas Hose