Page 6
SAfETy INSTRUCTIONS
SPECIfIC SAfETy RULES fOR
CORDLESS IMPACT DRIVER
1.
Use the tool only with the batteries
and charger listed below:
Battery pack
Charger
252-8016
252-8020
252-8017
2.
WARNING:
Hold power tools
by their insulated gripping surfaces when
performing an operation where the cutting
tool may contact hidden wiring or its own
cord. Contact with a “live” wire will make
exposed metal parts of the tool “live” and
shock the operator.
3.
Use protective gloves when removing
the bit from the tool, or first allow the
clamp to cool down.
The bit may be hot
after prolonged use.
4.
Use protective gloves when operating
the tool.
Protective gloves can help to keep
you from being burned and hurt.
5.
keep your hands away from the
motor-housing vents.
Hot gas comes from
the vents during operation.
6.
Do not operate the tool at full-load
for more than 30 seconds, as this can
cause the motor to become too hot, which
may damage the motor.
6.
Release the trigger immediately when
the screws are tightened to avoid
breaking the screw.
7.
for best results, your battery tool
should be charged in a location where
the temperature is more that 50
°
f (10
°
C)
but less that 104
°
f (40
°
C).
Do not
store outside or in vehicles.
