9
An extension cord should not be used unless absolutely necessary.
Use
of an improper extension cord could result in a risk of fire and electric
shock. If an extension cord must be used, make sure that:
The pins on plug of extension cord are the same number, size and shape
as those of the plug on charger.
The cord is properly wired and in good electrical condition
The size is large enough for AC ampere rating of charger as specified
below:
The Cord Length (Feet) 25’ 50’ 100’
Cord Size (AWG) 16 16 16
NOTE:
AWG = American Wire Gauge
Do not operate the charger with a damaged cord or plug,
which could
cause shorting and electric shock. If damaged, have the charger repaired
or replaced by an authorized service technician.
Do not operate the charger if it has received a sharp blow, been dropped,
or has otherwise been damaged
in any way. Take it to an authorized
service technician for an electrical check to determine if the charger is in
good working order.
Do not disassemble the charger.
Take it to an authorized service
technician when service or repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
Unplug the charger from the electrical outlet
before attempting any
maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use.
This will
reduce the risk of electric shock or damage to the charger if metal items
should fall into the opening. It will also help prevent damage to the
charger during a power surge.
Risk of electric shock.
Do not touch the uninsulated portion of output
connector or uninsulated battery terminal.
Save these instructions.
Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also
lend these instructions to them to prevent misuse of the product and
possible injury.
Summary of Contents for 241-0303
Page 20: ...20...
