ASSEMBLY INSTRUCTIONS
Hardware Used
x 8
M6 x 10 mm Bolt
Hardware Used
x 1
M6 Ring Screw
AA
BB
CC
x 1
M6 Flange Nut
2. Remove eight M6 x 10 mm bolts (AA) from the legs
(F). Attach leg support ring (E) to the legs (F) with
eight M6 x 10 mm bolts (AA).
Note: Hand-tighten bolts only until the leg support
ring is completely assembled, then tighten all bolts
from steps 1 and 2.
3. Remove M6 flange nut (CC) from M6 ring screw
(BB). Attach M6 ring screw (BB) to the top of the
screen (B), then secure with M6 flange nut (CC).
1
2
3
Hardware Used
x 8
M6 x 10 mm Bolt
AA
BB
CC
B
1. Remove eight M6 x 10 mm bolts (AA) from the fire
bowl (D). Place the fire bowl (D) upside down and
attach the legs (F) to the fire bowl (D) with eight
M6 x 10 mm bolts (AA).
Note: Hand-tighten bolts only.
4
F
D
AA
AA
F
E
