N
Notes on the cord plug:
This appliance has a polarized plug. To reduce the risk of electric shock, this plug
is intended to fit into a polarized outlet only one way, If the plug does not fit fully
into the outlet, reverse the plug, If it still does not fit, contact a qualified electrician,
Do not attempt to modify the plug in any way.
otes on the cord
a) A short power-supply cord (or detached power-supply cord) is provided to
reduce risks resulting from becoming entangled in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord.
3) The longer cord should be arranged so that it will not drape over the counter top
or table top where it can be pulled on by children or tripped over.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Model no. 043-1004-4
| Contact us: 1-855-803-9313
5
4
TM
Kn
ow
Your Ele
ctric
Ke
ttle
Using
Your Ele
ctric
Ke
ttle
.
NOTE:
Ensure that switch is clear of obstructions and the lid is firmly closed.
The kettle will not turn off if the switch is obstructed or if the lid is open.
NOTE:
Always disconnect the power supply when not in use.
Before initial use
If you are using the kettle for the first time, it is recommended that you clean your kettle before use
by boiling a full kettle of water twice and then discard the water.
Operation
1. To add water in the kettle, remove it from the power base and open the lid by lifting the lid handle.
Fill with the desired amount of water. Always fill the kettle between the minimum
(0.5 L) and maximum (1.7 L.) marks. Too little water will result in the kettle switching off before the
water has boiled.
2. Close the lid. Position the kettle on the power base. Make sure the kettle is positioned correctly on
the power base.
3. Plug into power outlet. Press the switch down to "I" position and the switch light
will illuminate. The water will start to boil. The kettle will switch off automatically once the water
has boiled and the switch light turns off. You can shut off the power by pressing the switch at
any moment to stop the boiling process.
4. Lift the kettle from the power base and then pour the water.
5. The kettle will not re-boil until the switch is uplifted. Allow to cool for 15~20 seconds before
reopening to boil water. The kettle may be stored on the power base when not in use.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the
power cord into the power outlet.
KE01402-UL Manual-431321(32开).indd 4-5
2017/3/27 上午 8:27:53
NOTE:
Use caution when pouring the water from your kettle as boiling
water may result in scalding. Do not open the lid as the water in the
kettle is hot.
Handle
Switch
Power base
Lid
Water gauge
Housing
