N
Notes on the cord plug:
This appliance has a polarized plug. To reduce the risk of electric shock, this plug
is intended to fit into a polarized outlet only one way, If the plug does not fit fully
into the outlet, reverse the plug, If it still does not fit, contact a qualified electrician,
Do not attempt to modify the plug in any way.
otes on the cord
a) A short power-supply cord (or detached power-supply cord) is provided to
reduce risks resulting from becoming entangled in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised in their use.
c) If a long detachable power-supply cords or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord.
3) The longer cord should be arranged so that it will not drape over the counter top
or table top where it can be pulled on by children or tripped over .
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Model no.043-5765-8 | Contact us: 1-855-803-9313
5
4
TM
Kn
ow
Your Ele
ctric
Ke
ttle
Using
Your Ele
ctric
Ke
ttle
5. Lift the kettle from the power base and then pour the water.
NOTE:
Use caution when pouring the water from your kettle as boiling water may
result in scalding. Do not open the lid as water in the kettle is hot.
NOTE:
Do not fill the water over the maximum level, as water may spill out of
NOTE:
NOTE: Ensure that the switch is free of obstructions and the lid is firmly closed.
NOTE:
Always disconnect the power supply when not in use.
BEFORE USING YOUR KETTLE
USING YOUR ELECTRIC KETTLE
If you are using the kettle for the first time, it is recommended that you should clean
your kettle before
use
by boiling the Max capacity of water and then discarding the water. Wipe the surface with a damp
cloth.
1. Place the kettle on a flat surface.
2. To fill the kettle, remove it from the power base and open the lid. Fill the kettle with the desired
amount of water and close the lid. The water level must be within the Min and the Max level.
3. Position the kettle on the power base.
4. Plug the power cord into a power outlet. Press the power switch and the indicator will light up. The
the water has boiled. Wait 30 seconds before pressing the power switch again to re-boil the water.
the boiling process.
6. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power
base when not in use.
NOTE:
The max capacity of kettle is 1.7 L.
KE01402-UL Manual-431321(32开).indd 4-5
2017/3/27 上午 8:27:53
the spout when boiling. Ensure that the lid is firmly in place before plugging into
the power outlet.
