Amate Electroacústica,s.l.
MA210/MAW215.Version 1.11
Feb 09
12
Fig.11.
Connections panel for
MAW-215/D/2K
4.-SYSTEM CONNECTIONS
4.1.Active Systems with DSP Control MA-210/D7
As an example, let us start with a 4
MA-210/D7
cabinet configuration. All the rest of
configurations may be deduced from this base system.
Each cabinet includes a FACTORY PRESET which can be modify through the control
software or the in-built rear digital screen.
A sound system must be switched on sequentially. Firstly switch on the sound sources
such as CD players. Then, the mixer and finally the self-powered cabinets. If you are
using several units it is recommended that you switch them on sequentially one at
time.
If you are not using
MA-210/D7
in combination with low frequency reinforcement units,
plug the output of mixer into the
MA-210/D7
Input. (Fig.9.
INPUT SIGNAL
(C)).
If you have more cabinets, simply daisy chain them through
LINK INPUT SIGNAL
connectors.
Feed one unit through
AC INPUT
connector and simply daisy chain the others through
AC STACKING OUTPUT. The maximum number of units than can be linked this
way is 4 (including main unit).
