Master Audio
LNC Series. Version 1.0
Feb 10
12
WARNING!!!!:
In order to allow a bridge connection between cabinets, each one of
them has been provided with two Speakon connectors that allow the Input / Output
function indistinctly. Terminal Pins +1/-1 must be always used, disregarding the +2/-2
which are not internally connected.
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1. Placement
It is advisable to locate the low frequency units on the floor as they can take
advantage of the so-called “floor-effect”, thus increasing the response in the low
frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
3.2. Full range c subwoofer use
The
LNC-12W
and
LNC-15W
are equipped with a M20 Plate for a 35mm distance
rod. We can use it to place over the subwoofer the models that are equipped with the
tripod socket. Be careful not to use this system on non-flat surfaces as it may become
unstable.
Fig.6.
Full range cabinet with subwoofer
3.3. Live applications (mobile)
For a mobile application, whether it is an outdoor or indoor installation, the common
location is to place the bass units (one or two per channel) on each side of the stage.
