Master audio DSP306USB, User Manual

Page: 16 / 24

Master Audio
DSPSeries - MUS - Ver 1.1 ENG Nov 10 16
6.3.1.Recall - Program Recall
The DSP unit has a built-in non-volatile memory that can store up to 30 different
program setups. A program can be recalled using this menu.
• P:# - Program Number to be recalled. Press Enter twice to confirm the operation.
6.3.2.Store - Program store
A program can be stored using this menu. The old program with the same program
number will be replaced. Once the program is stored in the flash memory, it can be
recalled at a later time, even after power down.
• P:# - Program Number for the current data to be stored.
• NAM - Program Name, allows a maximum length of 12 characters.
6.3.3.Config - Device Configuration
• MODE - configures the mode of operation. The possible modes are shown in the
following table:
Mode Out 1 Out 2 Out 3 Out 4 Out 5 Out 6 Out 7
(408 only)
Out 8
(408 only)
None Any Any Any Any Any Any Any Any
Stereo 2-Way In1 In1 In2 In2 Any Any Any Any
Stereo 3-Way In1 In1 In1 In2 In2 In2 Any Any
Stereo 4-Way
(408 only)
In1 In1 In1 In1 In2 In2 In2 In2
The unit assigns the Input source for the corresponding outputs when the Mode of
Configuration is selected. The crossover point parameters like the filter type, cut-off
P:1 ____________
SYSTEM Recall
NAM:____________
SYSTEM Store
P:1
SYSTEM Store
MODE:None
SYSTEM Config