PRODUCT INFORMATION
Everyday cleaning:
To clean the CRISTALPLANT surface, just wipe with a damp cloth and a little normal
cleaning gel, cream or solution. Always rinse the surface of the bath thoroughly.
Never use solvent-based products, or particularly aggressive products such as
ammonia, turpentine, trichloroethylene, thinners etc.
Important:
This product information satisfies the provisions of Law no. 126 of 10 April 1991
“Standards for consumer information” and Decree no. 101 of February 8 1997
"Implementing regulation”.
Caring for your bath:
In the case of: SURFACES WITH DULL AREAS, SMEARS AND SMALL
ABRASIONS
These marks can be easily removed by thorough cleaning with abrasive detergent and
Scotch Brite pad (3M reg. trademark).
In case of: SMALL SCRATCHES
Proceed as above with detergent and Scotch Brite pad. If the scratch is still visible, use
emery paper, first moistened then dry.
In case of: DENTS AND DEEP SCRATCHES
Some types of serious damage can be completely repaired. Contact Mastella and
explain the type of problem to assess whether repair is feasible.
To respect the environment, if you decide not to use the product any longer, it should
be taken to a municipal waste collection centre.
19
SOFT TOUCH painted surface
Just clean with an ordinary surface cleaning spray and soft sponge or cotton cloth. Do
NOT use abrasive pads and do NOT use abrasive detergents.
“AKI” 210x145x50 H cm bathtub:
This is made from CRISTALPLANT, a compact non-porous material containing a high
percentage of natural mineral aluminium hydroxide and a small percentage of acrylic
polyester resin. This material is hygienic, pleasant to the touch and tough, particularly
suitable for making basins, shower trays and bathtubs.
