•
Protection of the meter against
misuse.
1.1.2 When the meter is delivered,
check that it has not been damaged
in transit.
1.1.3 When poor condition under harsh
preservation or shipping conditions
caused, inspect and confirm this
meter without delay.
1.1.4 Measuring leads must be in good
condition. Before using verify that
the insulation on test leads is not
damaged and/or the leads wire is
not exposed.
1.1.5 Full compliance with safety
standards can be guaranteed only if
used with test leads supplied. If
necessary, they must be replaced
with the same model or same
electric ratings.
1.2 DURING USE
1.2.1 Before using, you must select the
right input jack, function and range.
1.2.2 Never exceed the protection limit
values indicated in specifications for
2 Digital Multimeter
