Umbaubericht
Lokomotiven
Remove roof from driver’s cab
Desolder the diode from roof light PCB
Solder additional cable (in Pict.-4 white) on diode soldering point.
Extend the remaining 4 cables, for a better assembling.
Assemble driver’s cab on the chassis.
Assemble the remaining cables like the drawing:
Connection plan
Black cable from “red/black” on “+”
Red cable from “red/black” on “LI”
New white cable on “LV”
On any black cable of the last cable on “F1” + “F2”.
Now you can check the remaining functions:
Interior light glow in both directions, when turned on.
Yellow lamps on roof blinking alternately, when key 1 on.
After successful check assemble the remaining parts.
Additional possibilities:
To clean the track on highly polluted tracks we recommend assembling of a voltage buffer
(8151001) or a goldcap buffer (8151501).
If you wish you can trigger the functions individual:
(CV54 + CV56 = 2) to switch the roof blinking light with key 2
Red cable from roof light on “F4” in place of “LI” (change bulb to 19V)
Stand 15.04.2020
Seite 4 / 4
