Installation Instructions
3 | P a g e
v 1 . 1 ( 1 2 / 2 0 1 8 )
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTION
Does not work.
(New installation)
Wiring loose or no power to the luminaire.
Check your circuit breaker/safety switch
box turn on power to your circuit.
Does not work.
(Existing installation)
No power to the luminaire.
Check your circuit breaker/safety switch
box and turn on power to your circuit.
Contact your nearest Beacon Lighting
store.
Flickers when dimming.
(New installation)
Non-tested dimmer used.
Check the dimmer used. Ensure the
dimmer used is on the list of tested
dimmers in this manual.
Some dimmers have a variable loading
adjustment function.
eg. Lucci LEDlux SKU# 290998 dimmer.
This may not have been adjusted during the
installation of the dimmer.
The variable resistor needs to be
adjusted to suit the luminaire load to
reduce the flickering.
Flickers when dimming.
(Existing installation)
Dimmer position on low.
Ensure the dimmer position is on the
maximum setting before turning on the
luminaire and adjust the dimmer down to
your desired light level.
Buzzing sound.
Non-tested dimmer used.
Check the dimmer used. Ensure the
dimmer used is on the list of tested
dimmers in this manual.
Uneven light start up.
Dimmer position on low when switched on.
Ensure the dimmer position is on the
maximum setting before turning on the
luminaire and adjust the dimmer down to
your desired light level.
Safety Tips
•
Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning,
changing the globe or making any adjustment to the fitting.
•
To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
•
The fitting must not be used if the shade has been cracked.
•
The LEDs are not replaceable and there are no serviceable parts, do not attempt to dismantle or open the product.
•
Ensure that the fitting does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
•
To clean, wipe with a damp clean cloth. Do NOT soak or immerse the product in water or other liquids.
