Custom tooled steel basket with heavy powder coating
Heavy gauge stamped steel basket, to minimize vibration.
Heavy powder coating to damp the basket to further minimize
vibration and ringing noises.
Y40 High Flux Ferrite magnets:
These high energy Y40 magnets assures sufficient magnetic force
needed for high SPL output.
Custom Tooled Motor Cover W/ Integrated Terminal Design:
For enhanced cosmetics and easy wiring for bridged or parallel voice coils.
Voice coil cooling
:
Black Electro
-
coated magnetic plates to draw heat from voice coil.
Vacuum Formed Poly-Mica Cone with embossed Massive Logo:
Custom Poly-Mica Body with
3D
embossed Massive logo.
1” tall rolled Polyester foam surround:
Custom polyester foam surround for maximum excursion, sound quality and
bass reproduction.
Kapton Fiberglass Former:
Dual 4 Ohm, 1.5” 4 layer voice coil with 30
mm winding length on a
composite Aluminum / Fiberglass former
Ventilation plate:
Molded ABS plate with chrome finish to insure noise free ventilation
High X-max:
15 mm peak to peak x-max to insure high SPL sound reproduction
400 Watts max 200Watts RMS
DESIGN FEATURES
4
This subwoofer has to play at a low frequency, Mid-volume
signal for at least 2 hours to loosen the suspension.
This is a requirement to get the best performance from
this sub-woofer.
Pre-install preparation
CAUTION!
Summary of Contents for PW10 Stage 2
Page 8: ...NOTES NOTES ...
