We recommend to have the installation done by an Authorized Massive Audio, Dealer.
Required Power, Ground Connection and proper external fuse as indicated below:
We recommend a fuse to be installed within 16 inches of the battery.
The Ground Wire should be connected directly to the chassis of your vehicle with a
metal to metal ground point connection.
The amplifier must be securely mounted to a solid, dry and low vibration surface in the
trunk or passenger area.
Position the amplifier in an area with sufficient air flow to insure proper heat dissipation.
Position the amplifier for an easy access to the input-setting controls.
Install all amplifier cables as far as possible from car electrical cables. i.e. The car
ignition cable.
Pre Installation
6
Wiring Configuration
2 OHM
MINIMUM Per Channel
2 OHM
MINIMUM Per Channel
2 OHM
MINIMUM Channel A L+R stereo
4 OHM
MINIMUM Channel B Bridged mono
P 400.4
/ P 800.4
Three Channel mode
P 400.4
/ P 800.4
Four Channel mode
P 200.2
/ P 400.2
Model
Fuse
Wire
P 200.2
30 AMP
8 Gauge
P 400.4
40 AMP
4 to 8 Gauge
P 400.2
40 AMP
4 to 8 Gauge
P 800.4
60 AMP
4 to 8 Gauge
