Instructions for Convertible Tweeter
To convert your CKX component kit to a co-axial please read the following instructions:
Step1:
Unscrew the phase plug from the cone of
the woofer.
Step3:
Feed the speaker wire through the pole piece
and down through the bottom of the magnet.
Step2:
Attach the tweeter housing to the pole piece
provided with the kit and make sure the bottom
of the tweeter housing aligns with the pole piece.
There will be 2 grooves that connect.
Step4:
Feed the wire through the cut groove in the washer
and insert the screw to the bottom of the magnet hole
and connect to the bottom of the tweeter housing.
Tighten the screw so that the tweeter is aligned and secure.
