MASSEY FERGUSON MF1746, Service Manual

Page: 17 / 31

4283381M2 01-13
General Information
SAFETY
Safety Alert Symbol
FIG. 19: The safety alert symbol means ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED!
This safety alert symbol indicates important safety
messages in this Operator Manual. When you see this
symbol, carefully read the message that follows and be
alert to the possibility of personal injury or death.
Safety Signs
If a used machine has been purchased, be sure that all
safety signs are in the correct location and can be read.
Replace any safety signs that can not be read or are
missing. Replacement safety signs are available from
your dealer. The location of safety signs is illustrated at
the end of this section.
Safety Messages
FIG. 20: Whenever you see the words and symbols
shown below, used in this manual, you MUST take note of
their instructions as they relate to personal safety.
m
DANGER: Indicates an imminently
hazardous situation that, if not avoided, will
cause death or very serious injury.
m
WARNING: Indicates a potentially
hazardous situation that, if not avoided,
could result in death or serious injury.
m
CAUTION: Indicates a potentially
hazardous situation that, if not avoided,
may result in minor injury.
Informational Messages
The words IMPORTANT and NOTE are not related to
personal safety, but are used to give additional
information and tips for operating or servicing this
equipment.
IMPORTANT: Identifies special instructions or
procedures which, if not strictly observed, could
result in damage to or destruction of the
machine, process, or its surroundings.
NOTE: Identifies points of particular interest for more
efficient and convenient repair or operation.
FIG. 19
Saf
FIG. 20
WC1957