GENERAL INFORMATION
Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011
1-15
MAINTENANCE WORK
Work on the Machine
1.) Before inspecting, cleaning, adjusting or
servicing combine and table (grain or maize),
always ensure that the engine is stopped, the
brakes are applied and all moving parts have
come to a complete stop.
¥
WARNING
: Wear protective clothing
(overalls, gloves, shoes, goggles, mask,
etc.) suited to the maintenance operation
that you intend to carry out.
2.) To lift one side of the machine (for example to
remove a wheel), use lifting equipment with
suitable capacity, e.g. a column hydraulic jack
or a lift with a minimum capacity of 10,000 kg.
3.) Pay special attention while removing
preloaded parts.
¥
DANGER:
Risk of shocks.
It is strictly forbidden to loosen the nut
fastening the cylinder variator pulley
without using the proper tools. This
operation may be carried out only by your
Dealer's skilled staff.
4.) Work on tyres requires correct tools and expert
knowledge.
An incorrect assembly can
seriously compromise your safety.
When in
doubt, refer to specialised staff.
5.) Before fitting the wheels, ensure that the
contact surfaces of wheel rim and final drive
hub are perfectly clean and that the thread is in
perfect condition.
The front wheel fixing elements must be torque
tightened to 600-650 Nm (61-66 kgm)
crosswise and the rear wheel fixing elements to
304 Nm (31 kgm).
Check these torques after the first hours in
operation or transfer (2-3 hours) and every 50
hours thereafter.
6.) Do not carry out any work (inspection or
maintenance) on the machine when the wheels
have been removed, unless the machine is
properly supported.
¥
DANGER:
Risk of high pressure fluid
splashes.
7.) The air-conditioning, hydraulic, hydrostatic
and diesel oil injection systems may be
pressurised. Maintenance work on the
systems may be carried out only by specially
trained staff.
8.) Before working on any part of the electrical
system, remove the battery ground cable or
switch off the main battery switch.
