How to Install Another Cable
Cable processing
¡
If possible, use 5C2V coaxial cable, or other cable which has either equaling or surpassing performance.
¡
Remove assembled weather boot connected to dipole port, then pass cable through weather boot again.
(Process cable tip after getting cable through weather boot.)
Connection to Multi Dipole
Fold back
braided wires
Braided wires
Weather boot
Coaxial cable
(5C2V)
Cover
4
Weather boot
Coaxial cable
Tuck weather boot
onto cable entrance
of multi dipole base
absolutely.
DO NOT bind vinyl tape
onto weather boot, rain
drops occurs trouble.
1
Insert center conductor under retainer plate.
2
Fix the folded outer conductor (braided copper wire) with
screw for fixing outer conductor, and tighten it at the
torque value below.
3
Fix the center conductor of cable with screw for fixing
center conductor at the torque value below.
1
Open the cover of multi dipole, then install
coaxial cable.
2
After installing coaxial cable, close the
cover firmly.
Retainer plate of
center conductor
Center conductor
Screw for fixing
center conductor
¡
Tightening torque value
0.4N·m
(4.1kgf·cm)
Screw for fixing
outer conductor
¡
Tightening torque value
0.4N·m
(4.1kgf·cm)
Shut the cover of multi dipole with a snap after connecting cable.
Use assembled
weatherboot to
multi dipole at
shipping.
13mm (Actual size)
9
3
