11
Step 7
–
- Push the combustor back to the rear stopper strip (3), on the baffle. Then push it towards left so that the
combustor locks between the front and rear stopper plates (1&2) on the firebox left wall. Note these are angled
forward at the top.
- Once locked into the left side, push the right end of the combustor towards the rear so that on the right, it is
between rear strip (3) and the right front stopper pin (4).
- The combustor should be fully pushed left and be leaning forward at the top. Cross-check it is positioned correctly
Step 8
–
With the damper still in “OPEN” position -
- Take the stainless steel flame arrestor plate and hold vertically, ensuring flang with notches is at the bottom.
