546873 - Masport Aerocore Hedge Trimmer Owner’s Manual - December 2020
6
Product Specifications
Product Diagram
1. Blade
2.
Safety Guard
3.
Front switch lever (All round switch function)
4.
Battery Release Button
5.
Battery Pack*
6.
Lock-off Button
7.
Rotating Rear Handle
8.
On/Off Switch
9.
Locking Switch for Rotating
10.
Blade Sheath
11. Charger*
Operation
BEFORE PUTTING INTO OPERATION
1. CHARGING THE BATTERY (SEE FIG. B)
a.
The battery in your new tool is not charged when it leaves
the plant; therefore, it must be full charged before using the
first time.
b.
If the battery pack is very hot, remove the battery from the
charger and allow it to cool to ambient temperature before
attempting to recharge.
c.
To prevent damage to the battery pack, please charge the
battery to full or no less than half charge before storage.
d.
If the tool will not be used for long periods of time, charge
the battery pack every 3-6 months.
CHARGING PROCEDURE
1)
Plug the charger into an appropriate outlet.
2)
Slide the battery pack into the charger, and make sure
the battery is in the correct charge position firmly. The light
will begin flashing green to
indicate the charging process
has started.
3)
When charging is
completed, the light will turn
solid green.
4)
After the battery is fully
charged, unplug the charger
and remove the battery pack.
NOTE:
If the battery pack
is locked in the charger, press the battery pack release
button and remove it.
Warning! The charger and battery pack are specially
designed to work together so do not attempt to use any
other devices. Never insert or allow metallic objects into
your charger or battery pack connections because an
electrical failure and hazard will occur.
WARNING: When battery charge runs out after
continuous use or exposure to direct sunlight or heat,
allow time for the tool to cool down before re-charging
to achieve the full charge.
CHARGING INDICATOR
This charger is designed to detect some problems that can
arise with battery packs. Indicator lights indicate problems
(see table below).
Light
ON/Flash
Status
Red on
Defective Battery
Red flash
Battery Temperature Protection.
The temperature of the battery
pack is less than 0
o
C or more
than 40
o
C.
Green on
Fully Charged
Green flash
Charging
2. Removing and installing the battery pack
To install or remove the battery pack (SEE FIG. B)
Slide the battery pack into tool’s battery port. A simple push
Product
Aerocore Hedge Trimmer
CHT60H.9
Rated Voltage
60V MAX
No Load Speed
3800/min
Max. Cutting Diameter
30mm
Blade Length
610mm
Battery Capacity
[553155 / ABP6025H]*
2.5 Ah
Battery Capacity
[553156 / ABP6050H]*
5.0 Ah
Charger Input
[553157 / ACG6025H]*
100-240V ~ 50/60Hz
Charger Output
[553157 / ACG6025H]*
60V 2.5 A
Charger Protection Class
/ II
Machine Weight
4.85kg (Hedge Trimmer Only)
11
*Not included in some models
