546876 - Masport Aerocore Battery Owner’s Manual - December 2020
4
Product Specifications
*Disclaimer: Maximum initial battery voltage (measured off load) is 60.0v.
Nominal voltage as per industry rule (3.65v /cell) is 54.0 Volts.
Product Diagram
1.
Carry handle
2.
Battery release button
3.
Battery capacity indicator
WARNING:
Remove the battery pack from the
package and examine it carefully. Do not discard the carton
or any packaging material until all parts have been examined.
WARNING:
If any part of the battery pack is missing
or damaged, do not attach the battery pack to the tool until
the part has been repaired or replaced. Failure to heed this
warning could result in serious injury
Operation
NOTE: Before using your battery pack, be sure to read
the instruction manual carefully.
Before attempting to use this tool, became familiar with
all of its operating features and safety requirements. For
optimum performance and safety, read the following
operating instructions carefully before using.
WARNING: Do not allow familiarity with the
battery to cause a lack of alertness.
A fraction of a second of carelessness is enough to
cause severe injury.
Do not continue to press the On/Off switch after the
machine has automatically switched off. The battery
could be over-discharged.
NOTE:
1. Your battery pack is UNCHARGED. To ensure full
capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the
first time.
2. A battery pack will slowly lose its charge when kept out
of the charger or left in an unplugged charger for a long
time. It may need to be recharged before use.
3. Charge the lithium-ion battery pack only with the correct
charger. The Li-ion battery is protected against deep
discharging. When the battery is empty, the machine is
switched off by means of a protective circuit: the tool no
longer operates. In a warm environment or after heavy
use, the battery pack may become too hot to permit
charging. Allow time for the battery to cool down before
recharging. The Li-ion battery can be charged at any time
without reducing its service life. Interrupting the charging
procedure does not damage the battery.
COLD WEATHER OPERATION
When the battery pack is very cold, it may “pulse” for the
first minute of use in order to warm itself. Put the battery
pack on a tool and use the tool in a light application. After
about a minute, the battery pack will have warmed itself
and will operate normally.
How to charge the battery pack (See Fig. A1, A2)
CHARGING PROCEDURE
1)
Plug the charger into an appropriate outlet.
2)
Slide the battery pack into the charger, and make sure the
battery is in the correct charge position firmly. The light will
begin flashing green to indicate the charging process has
started.
3)
When charging is completed, the light will turn solid green.
4)
After the battery is fully charged, unplug the charger and
remove the battery pack.
NOTE:
If the battery pack is locked in the charger, press
the battery pack release button and remove it.
Warning! The charger and battery pack are
specially designed to work together so do not attempt
to use any other devices. Never insert or allow metallic
objects into your charger or battery pack connections
because an electrical failure and hazard will occur.
WARNING: When battery charge runs out after
continuous use or exposure to direct sunlight or heat,
allow time for the tool to cool down before re-charging
to achieve the full charge.
Product
Aerocore 2.5Ah Battery
ABP6025SH / 553155
Aerocore 5.0Ah Battery
ABP6050SH / 553156
Rated Voltage
60V MAX*
60V MAX*
Battery Capacity
[553155 / ABP6025H]*
2.5 Ah
5.0 Ah
Battery Type
Lithium-ion
Lithium-ion
Battery Weight
1.55kg
2.34kg
*Not included in some models
