![Masimo Radical 7 Operator'S Manual Download Page 3](http://html1.mh-extra.com/html/masimo/radical-7/radical-7_operators-manual_1735243003.webp)
3
■
Changes or modifications to the wireless radio feature whether intentional or
unintentional are prohibited without written approval from Masimo Corporation.
SAFETY INFORMATION, WARNINGS, CAUTIONS AND NOTES (CONTINUED)
■
The Radical-7 (device with optional radio) wirelessly transmits real-time sensor connectivity
status, indicating a connect and/or disconnect state. If the device is in a failure mode then
the radio power is disabled and an error message is indicated on the device display. The
device does not have a powered state where no information is transmitted.
■
In accordance with FCC requirements, the Radical-7 (device with optional radio)
must be placed greater then 20 cm from the patient’s head or torso.
■
In accordance with FCC requirements, radio accessories on the Radical-7 (device
with optional radio) cannot be attached directly to the patient using any accessory
containing metal components.
■
In accordance with international telecommunication requirements, the frequency
band of 5,150 MHz to 5,250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems.
SECTION 7: SPECIFICATIONS
Wireless Radio Specifications (if installed)
Radio Modes
8
802.11 a/b/g
Encryption
64/128-bit WEP, Dynamic WEP, WPA-TKIP, WPA2-AES
Authentication
Open System, Shared Key, Pre-Shared Key (PSK),
802.1X: LEAP, PEAP, TTLS, TLS, EAP-FAST
Compliance
USA
FCC ID: VKF-RAD7CPL
FCC parts 15.207, 15.209, 15.247 and 15.407
Canada
IC: 7362A-RAD7CPL
RSS-210
Europe
EN 300 328
EN 301 893
EN 301 489-17
Bluetooth Specifications (if installed)
RF output power (conducted
- excluding antenna gain)
Class 2 , max 4dBm (2.5mW)
Output frequency
2.402 - 2.480 GHz, ISM band
Referenced QDIDs
B016013 combined with B015102
Modulation
FHSS (Frequency hopping)
Compliance
USA
FCC ID: PVH0925
Canada
IC: 5325A-0925
Europe
EN 300 328
EN 301 489-1
EN 301 489-17
EN 61000-6-2