MECON LVT20 SERIES
pg. 8
Pin8 | +5V
Pin9 | enable
Pin10 |direction
Pin11 | stop
Common supply for external potentiometer, enable, direction and stop.
Logic signal to enable or disable the motor rotation.
Logic ‘low’:
Motor stops rotating and deccelerate as per the set deceleration.
Logic ‘high’:
Motor starts to rotate as per the set speed and will accelerate as
per the set acceleration.
Sets the direction of the motor. Changing the direction of the motor while in
rotation will deccelerate the motor till zero and accelerate the motor in other
direction as per the set acceleration and deceleration.
Logic ‘low’:
CW.
Logic ‘high’:
CCW.
Stops the rotation of the motor without deceleration.
Logic ‘low’:
Motor starts to rotate as per the set speed and will accelerate as
per the set acceleration.
Logic ‘high’:
Motor stops
Connector C3
Function
Pin1 | +5V
Pin2 | +5V
Pin3 | n.c
Pin4 | RS-485
Pin5 | RS-485
Pin6 | n.c
Pin7 | GND
Pin8 | GND
Positive supply (for external mash electric keypad).
--
RS-485 B terminal.
RS-485 A terminal.
--
GND (for external mash electric keypad).