Mash 50cc X-RIDE User Manual Download Page 15

28

29

Back to summary

Braking

Riders with little experience are usually content to use only the rear brake, which 

causes premature brake wear and increases the stopping distance. In addition, this 

would promote locking of the rear wheel and loss of control of the vehicle.

Therefore, it is strongly recommended that you do not use only one of the two 

brakes.

On wet roads or any other smooth surface, use extreme caution in gradually 

applying the brakes simultaneously. Abrupt braking on slippery, bumpy or smooth 

road surfaces is extremely dangerous. Always anticipate your braking in advance.

 Warning

The greater the braking distance the faster the vehicle speed is. Be sure to 

correctly assess the distance to the vehicle or object in front of you to brake 

accordingly.

VIII - Inspection and maintenance

The following table specifies the periodic maintenance intervals expressed in 

distance traveled or number of months. At the end of each period, remember to 

perform the inspection, lubrication and maintenance. If the motorcycle is routinely 

operated at a high load (for example, heavy engine load in dusty areas), perform 

maintenance at regular intervals. Your dealer will give you additional maintenance 

advice. The components of the steering, shocks, bearings and wheels are essential 

to the operation of the vehicle and should only be maintained and repaired by 

qualified professionals. To ensure your safety, it is recommended that inspection and 

maintenance be performed by your authorized MASH dealer.

 Caution

During periodic maintenance, it may be necessary to change one or more 

parts: these must be replaced by original parts. Regardless of your vehicle 

maintenance experience, items marked with the * symbol should be supported 

by your dealer and qualified service personnel. You can perform maintenance on 

items not marked with this symbol, provided you follow the instructions.

Warning

Once the vehicle has been broken in, maintenance is mandatory to ensure its 

safety and to fully exploit its performance.

Perform periodic maintenance in strict accordance with the instructions given in 

this manual.

Please note that the service interval is 3000 kms. Do not forget to certify them in 

the maintenance sheets of the warranty booklet provided by your MASH dealer. 

Summary of Contents for 50cc X-RIDE




























Reviews: