10
Hand-Arm vibration
Specification (According to ISO 5394, EN 1033 and EN500-4): 7.0m/s
2
Transportation
1. Shutdown engine for transportation.
2. For transportation, tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
3. Drain fuel for transportation over long distance or bad road.
4. Secure machine firmly to prevent it from moving or tipping.
5. Rammer should be transported in such position as it is placed on level ground.
6. Make sure lifting device has enough capacity to hold machine (see identification plate on
machine for weight). Use central lifting point (a) when lifting machine.
7. Use trolley kit (supplied as optional) for short distance transportation.
8. Do not lay down during transportation.
（
）
Troubleshooting Guide
A. Rammer Troubleshooting
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Engine rotates
but amplitude
not uniform or
does not strike
Operating speed of throttle
lever is incorrectly set?
Set throttle lever to correct position.
Oil in excess?
Drain excess oil. Bring to correct level.
Clutch slips?
Replace or adjust clutch.
Spring Failure?
Replace spiral spring.
Speed of engine improper?
Adjust engine speed to correct operating RPM
setting.
a
