Use the special spanner to remove the bottom nuts. Do not use other tools.
Turn the arch-slider assembly upside down.
With a 2mm Allen wrench loosen the screw (
5
) fixing the rebound adjustment knob (
6
) from the right leg.
Remove the rebound adjustment knob (
6
).
Using the special 12mm spanner (
A
), loosen the right bottom nut (
7
).
Pull out the bottom nut (
7
) complete with O-ring (
8
).
Take great care not to damage the O-ring on the pumping element rod.
Using the special 12mm spanner (
A
), loosen the left bottom nut (
1
).
Pull out the left bottom nut (
1
) complete with O-ring (
2
).
Pull the crown-stanchion unit (
3
) off the arch-slider assembly (
4
).
Dismantling: Removing the right pumping element
Remove the bottom pad (
1
).
© Marzocchi Suspension
2006
-
DJ Urban
