Protect the upper part of the slider with the special tool (
A
).
With a screwdriver, prize off the sealing ring (
3
).
Remove the sealing ring (
3
).
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the sealing ring.
The old sealing rings and dust seals must not be used again.
The old sealing rings and dust seals must not be used again.
Dismantling: Removing the guide bushes
Use the special extractor to remove the guide bushes. Do not use other tools.
Fit the aluminium bush (
A
) to the extractor keeping the side with larger diameter towards the edge
opposite to striker (
D
).
Fit the extraction washer (
B
) with a black finish to the extractor.
During use, remove the non-used washer from the extractor.
Remove first the top bushes, then the bottom bushes.
Fit the extraction washer keeping the blunt side towards the threaded grubscrew (
C
) fixed crosswise on to
the main rod as shown.
The slot in the rod lets the extraction washer swing inside the rod itself.
Insert the extractor in the arch-slider assembly from the side of washer (
B
) as shown.
The slot in the extractor rod will let the washer pass underneath the bush to be extracted.
Use the special extractor to remove the guide bushes. Do not use other tools.
Fit the aluminium bush (
A
) to the extractor keeping the side with larger diameter towards the edge
opposite to striker (
D
).
Fit the extraction washer (
B
) with a black finish to the extractor.
During use, remove the non-used washer from the extractor.
Remove first the top bushes, then the bottom bushes.
© Marzocchi Suspension
2006
-
66 SL
