3
2019-07-29
19970160
Sash Limiter Installation
Ultimate Casement Field Applied Instruction
Install the Sash Limiter
1. Using a screwdriver, disconnect and remove the
frame bracket from the limiter arm. See figure 7.
Figure 7
Disconnect and remove frame bracket.
2. Referencing the chart and illustrations below,
obtain the correct location for the sash track
(dimension A) and frame bracket (dimension C).
Depending on the height of your window, you may
need to apply two tracks (dimension A and B for
the sash track, and dimension C and D for the
frame bracket). See figure 8, figure 9 and figure 10.
NOTE: Predrill all hole locations using a 3/32" or 7/64"
drill bit.
NOTE: For Awnings that require one sash limiter:
Apply on the exterior right hand side.
Figure 8
Casement sash shown.
Applies to Casement stile (A and B) and Awning bottom rail (B).
Figure 9
Clad frame (also applies to wood frame).
Applies to Casement jamb.
Ultimate Casement
Sash Track
Location
Frame Bracket
Location
Frame
Height
Dim
A
Dim
B
Dim C
Dim D
11 1/2" -
23"
(292-584)
1"
(25)
n/a
6 23/32"
(171)
n/a
23 1/8" -
71 1/8"
(587-1807)
10"
(254)
n/a
15 23/32"
(399)
n/a
> 71 1/8"
(1807)
10"
(254)
10”
(254)
15 23/32"
(399)
15 23/32"
(399)
Ultimate Awning (see figure 8 and figure 10)
Sash Track
Location
Frame Bracket
Location
Frame Height
Dim
A
Dim
B
Dim
C
Dim D
16" - 23 3/32"
(406-587)
n/a
1"
(25)
n/a
6 23/32"
(171)
23 1/8" - 72"
(587-1829)
n/a
10"
(254)
n/a
15 23/32"
(399)
Frame bracket
Limiter arm
Type of Unit
Dim E
Replacement
1 5/32"
(29)
Clad Full Frame
2 19/32"
(66)
Wood Full Frame
1 1/2"
(37)
3 7/8" (98)
1/2"
(13)
1/2"
(13)
3 7/8" (98)
11/16"
(43)
