17
If you see in the table some empty cells or marked
yellow
/
red
, it is an indication that distances between
some beacons are measured inconsistently or not measured at all. Try to check what the problems with
those beacons are. Try to re-position them, because, usually, there is an obstruction of some sort in the
between the beacons. Reset them.
Use
View => Table of distances
to monitor the measured distances between beacons
4.2.21 Freeze the map by clicking the button. Stationary beacons will stop measuring relative distances
and will be ready to measure distance from the mobile beacon(s)
4.2.22 Turn on and wake up mobile beacon similar to the operations with the stationary beacon:
https://youtu.be/A4aRsjH2-_E
Summary of Contents for Indoor Navigation System
Page 1: ...1 Marvelmind Indoor Navigation System Operating Manual V2017_05_20 www marvelmind com ...
Page 8: ...8 3 3 Indoor GPS system close up and internal view LiPol 3 7V 1000mAh ...
Page 24: ...24 5 1 Beacon HW v4 9 external interface 4x4 pinout ...
Page 25: ...25 5 2 Modem HW v4 9 external interface pinout ...